有线网络Cable-WiFi的技术架构及其运营

近年来由于移动终端技术的快速发展和数量的爆炸式增长,移动互联网成为网络运营商争夺的又一个制高点,针对无线宽带网络的布控,介绍有线网络Cable-Wi Fi的技术架构模式及其运营情况。     

On the probability distribution of faults in complex software systems

ContextThere are several empirical principles related to the distribution of faults in a software system (e.g. the Pareto principle) widely applied in practice and thoroughly studied in the software engineering research providing evidence in their favor. However, the knowledge of the underlying probability distribution of faults, that would enable a systematic approach and refinement of these principles, is still quite limited.ObjectiveIn this paper we study the probability distribution of faults detected during verification in four consecutive releases of a large-scale complex software system for the telecommunication exchanges. This is the first such study analyzing closed software system, replicating two previous studies for open source software.MethodWe take into consideration the Weibull, lognormal, double Pareto, Pareto, and Yule–Simon probability distributions, and investigate how well these distributions fit our empirical fault data using the non-linear regression.ResultsThe results indicate that the double Pareto distribution is the most likely choice for the underlying probability distribution. This is not consistent with the previous studies on open source software.ConclusionThe study shows that understanding the probability distribution of faults in complex software systems is more complicated than previously thought. Comparison with previous studies shows that the fault distribution strongly depends on the environment, and only further replications would make it possible to build up a general theory for a given context.     

Combined hardware–software multi-parallel prefiltering on the Convey HC-1 for fast homology detection

Protein databases used in research are huge and still grow at a fast pace. Many comparisons need to be done when searching similar (homologous) sequences for a given query sequence in these databases. Comparing a query sequence against all sequences of a huge database using the well-known Smith–Waterman algorithm is very time-consuming. Hidden Markov Models pose an opportunity for reducing the number of entries of a database and also enable to find distantly homologous sequences. Fewer entries are achieved by clustering similar sequences in a Hidden Markov Model. Such an approach is used by the bioinformatics tool HHblits. To further reduce the runtime, HHblits uses two-level prefiltering to reduce the number of time-consuming Viterbi comparisons. Still, prefiltering is very time-consuming. Highly parallel architectures and huge bandwidth are required for processing and transferring the massive amounts of data. In this article, we present an approach exploiting the reconfigurable, hybrid computer architecture Convey HC-1 for migrating the most time-consuming part. The Convey HC-1 with four FPGAs and high memory bandwidth of up to 76.8 GB/s serves as the platform of choice. Other bioinformatics applications have already been successfully supported by the HC-1. Limited by FPGA size only, we present a design that calculates four first-level prefiltering scores per FPGA concurrently, i.e. 16 calculations in total. This score calculation for the query profile against database sequences is done by a modified Smith–Waterman scheme that is internally parallelized 128 times in contrast to the original Streaming ‘Single Instruction Multiple Data (SIMD)’ Extensions (SSE)-supported implementation where only 16-fold parallelism can be exploited and where memory bandwidth poses the limiting factor. Preloading the query profile, we are able to transform the memory-bound implementation to a compute- and resource-bound FPGA design. We tightly integrated the FPGA-based coprocessor into the hybrid computing system by employing task-parallelism for the two-level prefiltering. Despite much lower clock rates, the FPGAs outperform SSE-based execution for the calculation of the prefiltering scores by a factor of 7.9.     

Rethinking Enterprise Architecture for Sustainable Energy System Development

The development of a sustainable energy system throughout an enterprise is a complex task, which requires an agile holistic approach. Such an approach needs to include a variety of objectives including energy strategy formation and strategic decision-making, which are directly related to the analysis and management of the main areas of sustainable development:The economic, technological, environmental, and social. These multidimensional requirements of sustainability are often difficult to achieve within the enterprise, because these aspects are interrelated and influenced by various internal and external environment factors. This paper first reviews the main challenges for an energy system, and then demonstrates how a strategic agile enterprise architecture driven approach could effectively guide the sustainable energy system development. The study presented in this paper provides a holistic approach that contributes to the advancement and usage of literature dealing with issues of sustainable energy system development and agile enterprise architecture, which has not been discussed before to any great extent.     

Robust Adaptive Control of Pulse-width Modulated Rectifiers Based on Adaptive Super-twisting Sliding-mode and State Feedback Controllers

Abstract—This article proposes a new robust adaptive hybrid controller for three-phase pulse-width modulated rectifiers to improve control performance. This hybridization is implemented by combining the second-order sliding mode with the adaptive gain super-twisting control law in the DC bus voltage control loop and state feedback adaptive control in the d-q-axis current control loops. The control objectives are fourfold: (1) driving the DC bus voltage to a reference signal without using a priori knowledge of the plant parameters, (2) forcing the d-q-axis current errors to zero, (3) assuring a satisfactory power factor correction in relation to the AC source, and (4) eliminating the chattering effect. In the closed-loop control system, three-phase source currents and the DC bus voltage are supposed to be available for feedback. As a result, no a priori knowledge of the plant parameters is necessary in the design of the proposed controller. In addition, the proposed controller does not have the disadvantages of singularity, over-parameterization, and chattering phenomenon. Results of experimental studies prove that the proposed control system guarantees the tracking of reference signals with high performance despite all the parameter and external disturbance uncertainties.     

A robust adaptive weighted constant modulus algorithm for blind equalization of wireless communications systems under impulsive noise environment

A robust adaptive weighted constant modulus algorithm is proposed for blind equalization of wireless communication systems under impulsive noise environment. The influence of the impulsive noise is analyzed based on numerical analysis method. Then an adaptive weighted constant modulus algorithm is constructed to adaptively suppress impulsive noise. Theoretical analysis is provided to illustrate that the proposed algorithm has a robust equalization performance since the impulsive noise is adaptively suppressed. Moreover, the proposed algorithm has stable and quick convergence due to avoidance of large misadjuntment and adoption of large step size. Simulation results are presented to show the robust equalization performance and the fast convergence speed of the proposed algorithm under both impulsive noise and Gaussian noise environments.     

基于多自由度气动机械手位置伺服系统稳定性控制研究

基于传统易碎薄板机械手位置伺服控制系统稳定性低、自动化分拣效率低等不足,设计了一种基于笛卡尔坐标式的气动码垛机器手和位置伺服稳定性控制系统。首先,设计并介绍笛卡尔坐标式码垛机械手的基本组成结构,对机械手末端吸盘气动回路控制系统进行设计和分析;然后分别对机械手X、Y、Z三个方向的伺服电机控制原理进行分析并设计了一种位置伺服系统的前馈自适应控制算法;最后,将传统位置闭环PID算法和前馈自适应控制算法进行位置跟踪稳定性对比试验。实验结果表明该笛卡尔坐标式的气动码垛机器手和位置伺服稳定性控制系统设计合理,满足实际生产要求。     

Identification of Wiener systems based on the variable forgetting factor multierror stochastic gradient and the key term separation

The identification of Wiener systems is very difficult because of the output nonlinearity and the parameter product term. To identify the Wiener system, a novel stochastic gradient algorithm based on the multierror and the key term separation is proposed. Firstly, the Wiener system is parameterized as a pseudo-linear model to avoid the products of the parameters. Secondly, a parzen window is used to estimate the probability density function of the error. Thirdly, a stochastic information gradient algorithm with the multierror is adopted to estimate the parameters. The multierror takes the place of the scalar error by the stacked error, which accelerates the algorithm greatly. Fourthly, a variable forgetting factor considering errors is integrated to further speed the algorithm up. Finally, the proposed algorithm is validated by a numerical example and an industrial case. The estimation results indicate that the proposed algorithm can obtain accurate estimates with fast convergence speed.     

Adaptive backstepping repetitive learning control design for nonlinear discrete‐time systems with periodic uncertainties

This paper addresses a tracking problem for uncertain nonlinear discrete‐time systems in which the uncertainties, including parametric uncertainty and external disturbance, are periodic with known periodicity. Repetitive learning control (RLC) is an effective tool to deal with periodic unknown components. By using the backstepping procedures, an adaptive RLC law with periodic parameter estimation is designed. The overparameterization problem is overcome by postponing the parameter estimation to the last backstepping step, which could not be easily solved in robust adaptive control. It is shown that the proposed adaptive RLC law without overparameterization can guarantee the perfect tracking and boundedness of the states of the whole closed‐loop systems in presence of periodic uncertainties. In addition, the effectiveness of the developed controller is demonstrated by an implementation example on a single‐link flexible‐joint robot. Copyright © 2014 John Wiley & Sons, Ltd.